3M™ Venture Tape™ Cryogenic Vapor Barrier Tape 1555CW is an all-weather multi-layered self-adhesive tape. It’s conformable and designed for low-temperature vapor barrier joint closure applications.  Tough in any weather, this durable, acrylic adhesive tape bonds and seals at temperatures as low as -10 °F (-23 °C).   This zero-permeable, 3-ply laminate features a durable aluminum foil that is 1-mil thick with 0.5 mil polyester film on both sides to protect against pinholes. The tear-resistant backing is conformable, allowing application on irregular and curved surfaces. Plus, the low-temperature acrylic adhesive helps resist extreme weather conditions. Tape is UL723 Classified.  When you’re looking for resistance and conformability that sticks, choose 3M™ Ve

3M™ Venture Tape™ Cryogenic Vapor Barrier Tape 1555CW is an all-weather multi-layered self-adhesive tape. It’s conformable and designed for low-temperature vapor barrier joint closure applications.  Tough in any weather, this durable, acrylic adhesive tape bonds and seals at temperatures as low as -10 °F (-23 °C).   This zero-permeable, 3-ply laminate features a durable aluminum foil that is 1-mil thick with 0.5 mil polyester film on both sides to protect against pinholes. The tear-resistant backing is conformable, allowing application on irregular and curved surfaces. Plus, the low-temperature acrylic adhesive helps resist extreme weather conditions. Tape is UL723 Classified.  When you’re looking for resistance and conformability that sticks, choose 3M™ Ve

3M™ Venture Tape™ Reflective BOPP Tape 6804 is a UV resistant 3 mil polypropylene (BOPP) film tape coated with a cold weather, mold inhibiting solvent acrylic adhesive system that performs well in a wide range of environmental conditions. This tape is designed for joining or seam sealing reflective or bubble insulation systems and installs on site without special tools.

Scotch® Aluminum Foil Tape 3311 is a general purpose repair and maintenance tape that is excellent for temporary and emergency repair of metal surfaces.   Featuring a high tack, pressure-sensitive, rubber adhesive and conformable backing, this dead-soft tape provides easy adhesion to smooth and irregular surfaces, like low energy substrates. The sturdy aluminum foil backing is set on a paper liner for ease of use.   Achieve long-lasting results with this tape which offers resistance to flame, moisture, UV degradation, water vapor, odor and smoke transmission. It's thermally conductive, heat reflective and light reflective, making it perfect for sealing aluminum faced insulation seams and joints.   This 2.0 in (5.1 cm) versatile tape can be applied in most w

3M™ VentureClad™ Insulation Jacketing System 1577CW-E is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 300 °F/149 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance cr

3M™ VentureClad™ Insulation Jacketing System 1577CW-WM is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance c

3M™ Aluminum Foil Tape 4380 is a self-wound, general purpose, aluminum foil backed tape combined with a pressure sensitive acrylic adhesive. This tape is ideal for general purpose sealing, holding, splicing or masking applications requiring the protection from heat or flame offered by a foil backing.

3M™ Venture Tape™ ASJ Facing Tape 1540CW is specifically designed for cold weather and high humidity application.  Coated with a proprietary, pressure-sensitive solvent acrylic adhesive with a kraft, scrim and foil laminate backing, this tape is easy to apply. Ideal for use as a closure seal on all service jacket (ASJ) faced duct piping systems or as a vapor seal on ASJ-faced duct board and pipe insulation.  It is highly durable, high-puncture and tear-resistant, and helps inhibits mold. Plus, it provides solid holding power for extended periods while resisting lifting and curling, and applies easily to curved and irregular surfaces.  Tape is UL723 Classified (15/0 Flame/Smoke Rating), and meets ASTM1136, Type I, II, III and IV.  Venture into a st

3M™ FSK Facing Tape 1525CW is an adhesive tape that is used for sealing and patching FSK-faced duct wrap insulation, as well as a vapor seal for reinforced aluminum faced fiberglass, mineral wool thermal insulation, and sheet metal.  Made with foil/scrim/kraft (FSK) lamination that is coated with a solvent acrylic, pressure-sensitive adhesive, this tape bonds and seals at temperatures as low as -10 °F (-23 °C). While designed for cold weather, it also offers excellent performance in demanding heat and humidity conditions. It easily conforms to irregular surfaces and shapes and offers easy removal for a simple application process.   This tape meets the UL723 flame/smoke rating, as well as the ASTM specification C1136, Type II and IV, for safe use. For best results, st

3M™ Venture Tape™ Selfwound PVC Tape 1506R is a 6 mil vinyl tape featuring an aggressive rubber adhesive formula that's specifically designed for sealing and seaming PVC pipe jackets and fittings.  This conformable tape is easy to use and offers linerless, self-wound application. The vinyl backing offers conformability and consistent adhesion across corners, curves, and other irregular surfaces.    This durable adhesive is built to last, making it ideal for sealing longitudinal and circumferential joints in PVC pipe coverings and jacketing.   The tape is PVC color-matched for a uniform appearance and is available in black or white.  For consistent results in your indoor PVC sealing and seaming applications, rely on 3M™ Venture Tape™ Self

3M™ Venture Tape™ Aluminum Foil Tape 1558HT is a white aluminum foil coated with an acrylic adhesive that's great for closing lap joints and vapor seals. Designed for cold weather tasks, it's ideal for use on white foil faced duct board to keep a clean, crisp appearance.  Featuring an acrylic pressure-sensitive adhesive, this tape performs well in cold weather as well as high heat and humid temperature. It bonds and seals in temperatures as low as 0 °F (-18 °C).   Hand-tearable, this tape is designed with a backing that flexes and conforms to irregular and curved surfaces. Once bonded, this tough tape holds tight for extended periods, while resisting lifting and curling over time.   Achieve durable, weather-resistant results for lap joint and vapor seal job

3M™ Aluminum Foil Tape 4380 is a self-wound, general purpose, aluminum foil backed tape combined with a pressure sensitive acrylic adhesive. This tape is ideal for general purpose sealing, holding, splicing or masking applications requiring the protection from heat or flame offered by a foil backing.

3M™ Venture Tape™ Metal Building Facing Tape 1537CW is a general-purpose PSK tape designed to be used as a vapor sealant for faced insulation jobs, such as Lamtec™ WMP™-VR facings.  This tape is excellent for humidity, high moisture and high heat applications. The black metalized polypropylene film/scrim/kraft facing tape is coated with an acrylic pressure-sensitive adhesive that bonds and seals extremely well in cold temperatures.  This tape is moisture- and mold-resistant and provides tear-resistance and durability through its tri-directional reinforcement. It has an ASTM specification of C1136 (Type IV) and it's backing delivers a PERM rating of 0.09.  For vapor seal results that last in demanding temperature conditions, use 3M™ Venture Tape™ Metal Build

3M™ Venture Tape™ Non-Adhesive FSK Facing 1527 is a foil/scrim/kraft (FSK) laminated facing which is suitable as an air and moisture barrier in a range of applications. This tri-directionally reinforced material delivers a perm rating of 0.02, and conforms well across curves and irregular surfaces. It applies easily and is excellent for use with a variety of insulation types and FSK facing tapes.

3M™ Venture Tape™ Aluminum Foil Tape 3520CW is a conformable, 3.7 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and offers reliable performance in temperatures ranging from -40 to 250 °F (-40 to 121 °). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke r