Venture Tape

Scotch® Light Duty Packaging Tape 600 is a transparent film tape designed for L-clip closure, attaching, tabbing and holding. The UPVC backing material is moisture, chemical and UV resistant. The acrylic adhesive is non-staining and removes cleanly from a wide variety of surfaces.

3M™ Specialty High Temperature Purple Masking Tape 501+ was designed to deliver clean paint lines where surface temperatures can reach up to 300°F/150°C degrees. This purple crepe paper tape is ideal for critical paint masking applications in specialty vehicle, automotive and industrial markets where strong holding and high temperature performance is required.

Made to hold, secure and bundle and works for temporary repairs. Great for crafting, decorating and labeling. All-purpose tape great for use at home or on the jobsite.

Made to hold, secure and bundle and works for temporary repairs. Great for crafting, decorating and labeling. All-purpose tape great for use at home or on the jobsite.

3M™ Venture Tape™ Aluminum Foil Tape 1521CW is a conformable, 2.8 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and bonds and seals at temperatures as low as -10 °F (-23 °C). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke rating, as well as the CAN/UL

3M™ Venture Tape™ Aluminum Foil Tape 3520CW is a conformable, 3.7 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and offers reliable performance in temperatures ranging from -40 to 250 °F (-40 to 121 °). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke r

3M™ Venture Tape™ Aluminum Foil Tape 1521CW is a conformable, 2.8 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and bonds and seals at temperatures as low as -10 °F (-23 °C). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke rating, as well as the CAN/UL

3M™ Venture Tape™ Film Faced ASJ Buttstrip Tape 106FXP is a pressure-sensitive tape formulated to adhere to polypropylene facings and excels in both cold and hot, humid temperatures ranging from -40 °F/-40 °C to 150 °F/66 °C  Get the best application under a variety of environmental conditions. This adhesive contains mold-inhibiting agents to help prevent corrosion under the insulation, as well as mold build-up in high humidity. The conformable facing can easily be applied to irregular surfaces and curves. Meets ASTM C1136, Type I, II, III, IV.  With excellent resistance to weathering and mold, 3M™ Venture Tape™ Film Faced ASJ Buttstrip Tape 106FXP is a great choice for a variety of conditions.

3M™ VentureClad™ Insulation Jacketing System 1577CW is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 300 °F/149 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance credit for

3M™ FSK Facing Tape 1525CW is an adhesive tape that is used for sealing and patching FSK-faced duct wrap insulation, as well as a vapor seal for reinforced aluminum faced fiberglass, mineral wool thermal insulation, and sheet metal.  Made with foil/scrim/kraft (FSK) lamination that is coated with a solvent acrylic, pressure-sensitive adhesive, this tape bonds and seals at temperatures as low as -10 °F (-23 °C). While designed for cold weather, it also offers excellent performance in demanding heat and humidity conditions. It easily conforms to irregular surfaces and shapes and offers easy removal for a simple application process.   This tape meets the UL723 flame/smoke rating, as well as the ASTM specification C1136, Type II and IV, for safe use. For best results, st

3M™ Venture Tape™ ASJ Facing Tape 1540CW is specifically designed for cold weather and high humidity application.  Coated with a proprietary, pressure-sensitive solvent acrylic adhesive with a kraft, scrim and foil laminate backing, this tape is easy to apply. Ideal for use as a closure seal on all service jacket (ASJ) faced duct piping systems or as a vapor seal on ASJ-faced duct board and pipe insulation.  It is highly durable, high-puncture and tear-resistant, and helps inhibits mold. Plus, it provides solid holding power for extended periods while resisting lifting and curling, and applies easily to curved and irregular surfaces.  Tape is UL723 Classified (15/0 Flame/Smoke Rating), and meets ASTM1136, Type I, II, III and IV.  Venture into a st

3M™ Conductive Aluminum Foil Tape 3302 is a high-strength, dead soft aluminum foil coated tape that's perfect for printed circuit manufacture and repair, shielding applications in the electronics industry and low-level EMI and RFI shielding applications.   This dead soft aluminum foil-backed tape features a conductive acrylic adhesive that bonds well to many materials, including those with difficult textures. It is malleable and can conform to irregular surfaces, and it has good "wetting out" capabilities to all textured surfaces.   This durable, UL510 listed tape is resistant to flame, moisture, weather, UV degradation, and chemicals. It is ideal for heating and cooling efficiency and helps reflect heat and light. A wide temperature range (from -40 °F/-40 °C to 250

3M™ Aluminum Foil Tape 2C120 is a silver general-purpose foil tape that can be used for a variety of applications, including vapor sealing for fibrous duct board, sheet metal ducts, blankets and foil/scrim/kraft (FSK) systems.  This high-strength, dead soft aluminum foil tape is coated with a cold-weather solvent acrylic pressure-sensitive adhesive, making it ideal for applications that require good temperature performance.   It's designed specifically for cold weather conditions and bonds and seals at temperatures as low as -10 ºF (-23 ºC). The cold-weather adhesive performs well in demanding temperature and humidity applications.   This easy-to-use, hand-tearable tape has a heavy duty liner and is malleable and conforms well to curved and irregular surfac

3M™ Venture Tape™ Selfwound PVC Tape 1510R is a 10 mil vinyl tape with an aggressive rubber adhesive for sealing interior PVC pipe jackets and fittings. The backing delivers excellent elongation for conformability to irregular surfaces and resists moisture, abrasion and chemicals. The tape is PVC color-matched for a uniform appearance. Linerless and self-wound for easy application.

3M™ VentureClad™ Insulation Jacketing System 1577CW-WME is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance

Scotch® Aluminum Foil Tape 3311 is a general purpose repair and maintenance tape that is excellent for temporary and emergency repair of metal surfaces.   Featuring a high tack, pressure-sensitive, rubber adhesive and conformable backing, this dead-soft tape provides easy adhesion to smooth and irregular surfaces, like low energy substrates. The sturdy aluminum foil backing is set on a paper liner for ease of use.   Achieve long-lasting results with this tape which offers resistance to flame, moisture, UV degradation, water vapor, odor and smoke transmission. It's thermally conductive, heat reflective and light reflective, making it perfect for sealing aluminum faced insulation seams and joints.   This 2.0 in (5.1 cm) versatile tape can be applied in most w

3M™ Venture Tape™ UL181A-P Aluminum Foil Tape 1581A is a high-strength, UL printed aluminum foil adhesive that creates a vapor seal for various sealing, masking and rigid duct board applications.  This cold-weather resistant adhesive offers reliable performance in temperatures that range from -40 °F/-40 °C to 300 °F/149 °C. The acrylic, pressure-sensitive coating also provides excellent moisture and UV resistance.   The aluminum-backed tape also resists lifting and curling and is hand-tearable - just pull the size you need and get the job started. Its durability and excellent conformability make this adhesive perfect for use on irregular surfaces and on materials such as faced fiberglass.   This tape meets UL181A-P and UL181B-FX Listed and ULC S102 Classifi