3M™ VentureClad™ Insulation Jacketing System 1577CW is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 300 °F/149 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance credit for

3M™ FSK Facing Tape 1525CW is an adhesive tape that is used for sealing and patching FSK-faced duct wrap insulation, as well as a vapor seal for reinforced aluminum faced fiberglass, mineral wool thermal insulation, and sheet metal.  Made with foil/scrim/kraft (FSK) lamination that is coated with a solvent acrylic, pressure-sensitive adhesive, this tape bonds and seals at temperatures as low as -10 °F (-23 °C). While designed for cold weather, it also offers excellent performance in demanding heat and humidity conditions. It easily conforms to irregular surfaces and shapes and offers easy removal for a simple application process.   This tape meets the UL723 flame/smoke rating, as well as the ASTM specification C1136, Type II and IV, for safe use. For best results, st

3M™ Venture Tape™ ASJ Facing Tape 1540CW is specifically designed for cold weather and high humidity application.  Coated with a proprietary, pressure-sensitive solvent acrylic adhesive with a kraft, scrim and foil laminate backing, this tape is easy to apply. Ideal for use as a closure seal on all service jacket (ASJ) faced duct piping systems or as a vapor seal on ASJ-faced duct board and pipe insulation.  It is highly durable, high-puncture and tear-resistant, and helps inhibits mold. Plus, it provides solid holding power for extended periods while resisting lifting and curling, and applies easily to curved and irregular surfaces.  Tape is UL723 Classified (15/0 Flame/Smoke Rating), and meets ASTM1136, Type I, II, III and IV.  Venture into a st

3M™ Conductive Aluminum Foil Tape 3302 is a high-strength, dead soft aluminum foil coated tape that's perfect for printed circuit manufacture and repair, shielding applications in the electronics industry and low-level EMI and RFI shielding applications.   This dead soft aluminum foil-backed tape features a conductive acrylic adhesive that bonds well to many materials, including those with difficult textures. It is malleable and can conform to irregular surfaces, and it has good "wetting out" capabilities to all textured surfaces.   This durable, UL510 listed tape is resistant to flame, moisture, weather, UV degradation, and chemicals. It is ideal for heating and cooling efficiency and helps reflect heat and light. A wide temperature range (from -40 °F/-40 °C to 250

3M™ Aluminum Foil Tape 2C120 is a silver general-purpose foil tape that can be used for a variety of applications, including vapor sealing for fibrous duct board, sheet metal ducts, blankets and foil/scrim/kraft (FSK) systems.  This high-strength, dead soft aluminum foil tape is coated with a cold-weather solvent acrylic pressure-sensitive adhesive, making it ideal for applications that require good temperature performance.   It's designed specifically for cold weather conditions and bonds and seals at temperatures as low as -10 ºF (-23 ºC). The cold-weather adhesive performs well in demanding temperature and humidity applications.   This easy-to-use, hand-tearable tape has a heavy duty liner and is malleable and conforms well to curved and irregular surfac

3M™ Venture Tape™ Selfwound PVC Tape 1510R is a 10 mil vinyl tape with an aggressive rubber adhesive for sealing interior PVC pipe jackets and fittings. The backing delivers excellent elongation for conformability to irregular surfaces and resists moisture, abrasion and chemicals. The tape is PVC color-matched for a uniform appearance. Linerless and self-wound for easy application.

3M™ VentureClad™ Insulation Jacketing System 1577CW-WME is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance

Scotch® Aluminum Foil Tape 3311 is a general purpose repair and maintenance tape that is excellent for temporary and emergency repair of metal surfaces.   Featuring a high tack, pressure-sensitive, rubber adhesive and conformable backing, this dead-soft tape provides easy adhesion to smooth and irregular surfaces, like low energy substrates. The sturdy aluminum foil backing is set on a paper liner for ease of use.   Achieve long-lasting results with this tape which offers resistance to flame, moisture, UV degradation, water vapor, odor and smoke transmission. It's thermally conductive, heat reflective and light reflective, making it perfect for sealing aluminum faced insulation seams and joints.   This 2.0 in (5.1 cm) versatile tape can be applied in most w

3M™ Venture Tape™ UL181A-P Aluminum Foil Tape 1581A is a high-strength, UL printed aluminum foil adhesive that creates a vapor seal for various sealing, masking and rigid duct board applications.  This cold-weather resistant adhesive offers reliable performance in temperatures that range from -40 °F/-40 °C to 300 °F/149 °C. The acrylic, pressure-sensitive coating also provides excellent moisture and UV resistance.   The aluminum-backed tape also resists lifting and curling and is hand-tearable - just pull the size you need and get the job started. Its durability and excellent conformability make this adhesive perfect for use on irregular surfaces and on materials such as faced fiberglass.   This tape meets UL181A-P and UL181B-FX Listed and ULC S102 Classifi

Tri-directionally reinforced, white metalized polypropylene film/scrim/kraft facing tape coated with a cold weather acrylic pressure sensitive adhesive.

3M™ Venture Tape™ Woven Patch Tape 442W is a patch tape ideal for seaming, repairing, bonding, patching or reinforcing various hard-to-bond materials.

The woven composition of this tape is designed to match white woven insulation facings for a seamless look and also adds durability in harsh environments for long-lasting, reinforced results.

This high-strength tape bonds quickly and strongly thanks to its high tack adhesive. It's tough enough to prevent tearing during challenging applications, like bundling materials with uneven edges.

Recommended uses for this tape include patching and repairing polyethylene and polypropylene fabrics, bulk bags and tarps, reinforcing cotton bales and bundles of lumber, bonding agricultural films, and seaming greenhouses.

3M™ Venture Tape™ Non-Adhesive Facing 2537 is an 8 mil polypropylene/scrim/kraft laminated facing which is suitable as an air and moisture barrier in a range of applications. This facing/wrap for metal building delivers a perm rating of 0.09. It applies easily and is excellent for use with a variety of insulation types.

3M™ Venture Tape™ Aluminum Foil Tape 1521CW is a conformable, 2.8 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and bonds and seals at temperatures as low as -10 °F (-23 °C). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke rating, as well as the CAN/UL

When sealing ducts and other surfaces for heating, ventilation and air conditioning systems (HVAC), it's essential to have a strong, long-lasting foil tape that can stand up well to hot and cold temperatures. The 3M™ Foil Tape 3340 has the combination of 2.0 mil aluminum foil backing and strong, pressure sensitive acrylic adhesive that gives our tape a superb operational temperature range of -40°F (-40°C) to 300°F (149°C) making it ideal for sealing rigid fiberglass duct boards and flexible air duct systems. The foil backing also serves as an excellent barrier against moisture, dust and many chemicals — making it strong, durable and long-lasting. The very low moisture vapor transmission rate makes the tape a good sealant and the acrylic adhesive supplies superior temperature and UV resi

3M™ Aluminum Foil Tape 3380 is designed for cold weather applications while also working well in hot temperatures and high humidity environments.  Tape 3380 features 1.8-mil thick foil and is and coated with a pressure-sensitive acrylic adhesive. It bonds to many surface materials quickly upon contact, including fibrous and sheet metal ducts. An easy-release liner and hand-tearable construction make application convenient.  Smoothly fit irregular shapes thanks to this silver tape's conformable properties. Protect every bond and seal without the need for extra tools. Tape is UL723 classified.   Use 3M™ Aluminum Foil Tape 3380 tape when you need long-lasting protection in low-temperature environments from moisture, ultraviolet light, and environmental exposur

3M™ Venture Tape™ Aluminum Foil Tape 1520CW is a conformable, 3.2 mil tape that is suitable for masking and sealing in general-purpose heat shielding and light-reflecting applications.  Coated with cold-weather acrylic adhesive, this durable tape performs well in a wide range of environmental conditions, and bonds and seals at temperatures as low as -10 °F (-23 °C). It is backed by foil that allows it to easily conform to irregular surfaces and on fibrous and sheet metal ductwork.  This pressure-sensitive tape is hand tearable and adheres quickly without special application methods or additional tools. It maintains its form without lifting or curling, even after an extended period of time.  This tape meets the UL723 flame/smoke rating, as well as the CAN/UL

3M™ VentureClad™ Insulation Jacketing System 1577CW-WME is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance

3M™ VentureClad™ Insulation Jacketing System 1577CW-WM is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes.   This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task.  This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel.  It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI).  This tape qualifies for compliance c